Skip to main content

PTFE FABRIC

PTFE coated fabrics, mesh fabrics and belts

PTFE coated fabric

Polytetrafluoroethylene (PTFE) is a  fluorocarbon plastic; that is, a plastic in which the hydrogen normally found  in association with carbon in organic materials has been replaced by fluorine.  This produces a number of remarkable properties, and PTFE is reputedly the most  inert substance known to man. It was discovered and developed by Dupont™, whose  trade name is Teflon®.

The outstanding properties of PTFE are:

  • Inertness: affected only by a number of  uncommon substances at high temperature
  • Low friction:  co-efficient 0.04 – 0.10, depending on load and surface speed
  • Outstanding electrical  insulation and di-electric properties
  • Extreme heat and cold  resistance: -190°C to + 260°C
  • High release from  sticky materials („non-stick“)
  • Chemical, corrosion,  and moisture resistance
  • Easy cleaning (nothing  bonds permanently)
  • Mildew, and fungus  resistance
  • Food contact approval

PTFE is best known generally as a non-stick  lining in cooking utensils and on cutting tools, and as a thread seal tape.  There are a vast number of industrial uses for which PTFE is available as  block, sheet, rod and tube, all of which can be machined in similar fashion to  metal. PTFE film can be formed by casting, extrusion or skiving (veneering) processes. There are a number of other fluorocarbons which have some degree of similarity to PTFE.

The closest in performance properties, are commonly used for processing and coating:

  • Fluorinated Ethylene Propylene (FEP). Working  temperature is -260°C to +205°C. As it forms a proper film surface (as opposed  to the micro-porous sintered surface of PTFE) it has lower permeability to most liquids and gases (and resists the locking on of ice). Impact strength and wear  resistance are also higher.
  • Perfluorinated Alkoxy (PFA), a co-polymer of  PTFE. Working temperature is -260°C to +260°C. It has similar properties to FEP but with the higher working temperature of PTFE.

PTFE (TEFLON®) COATED PROCESS FABRICS

Coating

Our suppliers have been using PTFE in the form  of water-based (aqueous) dispersion to coat flexible woven, and some non-woven,  materials such as glass fibre cloth (usually referred to as glass cloth, or  simply „glass“), Nomex®, Kevlar® and woven wire.

These high  performance substrates lend the polymer additional dimensional stability and mechanical strength. Only materials which stand the very high processing and application temperatures can be coated. A variety of techniques can be used in processing to improve the tear strength and resistance to creasing of the finished fabric, provide conductivity (anti-static properties), or resistance  to oil and fats.

Colour

The natural colour of coated fabric is light to  medium tan, sometimes darker. This is normally not controllable, as the colour  is produced by the caramelisation of the weaving sizes and lubricants in the  various cloths when heated during PTFE coating. Pigmentation is possible. PTFE Coated Glass Fabric (PTFE-Glass) In the bulk of applications glass cloth  provides the most cost effective substrate, and more than matches the PTFE’s  upper recommended operating temperature of 260°C and lower static operating temperature of -190°C. In dynamic conditions the coated fabric can be used down  to -50°C. The E-glass (electrical grade) glass used has a high strength to-weight  ratio and excellent electrical properties.

A wide range of cloth types are coated, and a combination of glass cloth and weight of coating is available to suit most applications. PTFE coated glass fabric is defined by: Base glass cloth style (coaters worldwide use similar types) (the US style reference as used in this  paper is the most common found); Weight of PTFE coating; Pre-treatments to base cloth or polymer; Whether one or two-side coated; Whether calendered (depending  on processing method).

Thickness / Gauge

PTFE-glass fabrics are frequently referred to  by thickness, in inches or metric measure. The most popular are: Original inch  size 0.003″, 0.005″, 0.006″, 0.010″ in USA known as 3mil,  5mil, 6mil, 10mil and in the UK as 3thou, 5thou, 6thou, 10thou and in Metric  (mm) 0.076, 0.127, 0.15, 0.25. US glass style numbers used are 108, 116 ,116  and 128 respectively.

Intermediate thickness‘ are possible, and much  heavier fabrics are used in process industries and in architectural  applications. As most coaters aim to produce a fabric of given weight rather  than thickness, the most accurate comparison is by base glass cloth type and  coated weight rather than thickness, although thickness can be important in  some applications.
Some caution is necessary when making  comparisons: fabrics varying in weight between 200g/m2 and 270g/m2 can casually  be called 5thou; however, as most of the weight over 200g is on the fabric  surface – where it is most useful in most applications – it is clear that  weight gives a better indication of quality and cost than thickness, so long as  the base cloth is comparable.

In recent years products of our suppliers’s “BP“  fabrics have become popular. The base fabrics of these are similar in weight  and thickness to traditional twisted yarn types “BT”, although some tend to be  thinner after processing.

The yarns in „BP“ fabrics have a minimum of  twist, which was absolutely necessary in the past to produce a yarn which would   resist the rigours of weaving in shuttle looms. They are flatter, so the  fabrics need less coating of PTFE to produce a good surface finish.

We do supply wide range of glass-ptfe materials. Do not hesitate to contact us with your requirements!

PTFE mesh fabrics and belts

We  select  excellent fiberglass or Kevlar as basic weaving material,  coated with excellent  PTFE resin to make it into all kinds of Teflon  mesh conveyer belts.

Basic material properties of MESH PTFE coated fabrics:

  • Extremes of heat and cold resistance: minus – 73°C to plus +  260°C
  • Chemical inertness: affected only by a few rare substances  at very high temperatures
  • High release from sticky materials ‚non-stick‘
  • Easy cleaning (nothing bonds permanently)
  • Low friction co-efficient: 0.04 – 0.10; depending on load  and surface speed
  • Chemical corrosion and moisture resistance
  • Mildew and fungus resistance
  • Outstanding electrical, insulative and di-electric  properties
  • Ultra-violet, infra-red, microwave, radio frequency  resistance
  • Non combustible – self extinguishing
  • Low thermal expansion: < 5%
  • Food approval (USFDA)
  • Lightweight and energy efficiency for economical operation

Features:

1. High temperature resistance.Operating temperature  range(from -73°C to 260°C )

2. Permeability.Avoiding wasting heat and improve drying  efficiency for it’s permeability.

3. Chemical resistance.Resisting all most of chemical  medicines.

4. Adherence resistance.Easily remove all kinds of adhesives  such as resin, paint and chemical medicine.

5. Good flexible fatigue resistance.Having high tensile  strength and excellent flexible fatigue resistance.

Applications:

1.Drying machine for nonwoven textile, textile printing,  silkprinting and dyeing machine.

2.Shrinking machine for garment fabric, highfrequency and UV  dryer.

3.Hot-air dryer, various of food baking machines ,quickfrozen  machines.

4.Oiling machine for paper glazing and waxing, plant  engineering.

We offer to our clients finely finished PTFE coated  mesh  that are made from premium grade resistant material which  protects against wear  & tear, heat, acid.

We do supply wide range of mesh glass-ptfe materials and made-to-measure belts. Do not hesitate to contact us with your requirements!